Trial Version Usage Basic Instructions

Step 1
Install NSP to First PC

Download the setup file and run the file on the first PC. Go through the installer by choosing either full stealth installation or Test/Demo mode which shows an icon in the Windows tray.

Step 2
Access NSP Interface on First PC

After you have installed the trial, you should enter the NSP control panel by clicking the icon, or closing all windows and pressing CTRL+ALT+SHIFT+P. The password box will appear. The default password is "retinax" without quotes

Step 3
Save the Internal IP address of First PC

You should write down or save the Internal IP address of this machine so you can test it from another machine through your web browser. This address is displayed on the NSP control panel screen near the bottom. as the "Internal IP:" address. For example: 225.35.44.153:80

Step 4
Repeat steps above for your second test PC

After you have successfully installed the software onto two test machines and have the two internal IPs, go to any PC within your network and open an Internet Explorer window. Then type the Internal IP of either machine into the address bar and click GO to connect. No connection? Click Refresh to re-establish the connection.

If you face any issues please visit our Support Center.